Drying operations relate to plastic forming operations and casting operations. Forced drying in controlled driers expedites production and guarantees continual controlled production flow.

Driers are usually built into automatic casting machines and roll forming machines. The drier is often designed to accommodate the different stages of drying. Airflow is adjustable throughout the drier.

When a piece of ceramic ware is first formed, the particles are separated by a water layer which can be easily and safely removed. For that reason, excessive heat can be supplied at this stage of drying.

Once the particles touch, the process becomes diffusion controlled and the water molecules must move slowly through the body matrix.

Finally, the last tightly held water must be removed.

These last two steps require careful heat and humidity control in the drier. Airflow must be controlled locally. See Ceramics: Industrial Processing and Testing by John T. Jones and M. F. Berard.

For automatic plastic forming operations incorporating built-in driers, the slip must be controlled as to particle

Drying of cast ware is less critical except for automatic casting machines. Slip control is again the most important function to prevent loss.

See the reference for more information on the drying process, slip control, and industrial driers.

John T. Jones, Ph.D. (tjbooks@hotmail.com, a retired VP of R&D for Lenox China, is author of detective & western novels, nonfiction (business, scientific, engineering, humor), poetry, etc. Former editor of Ceramic Industry Magazine, Jones is Executive Representative of International Wealth Success. He calls himself "Taylor Jones, the hack writer."

More info: http://www.tjbooks.com

Business web site: http://www.bookfindhelp.com (IWS wealth-success books and kits and business newsletters / TopFlight flagpoles)

• Corporate Records – What to Keep


• What Color is Your Business?


• Ceramic and Pottery Defects 1: Ceramic Processing Definitions


• Restaurant Equipment Tips: Energy Conservation Equals Higher Profits


• Ceramic and Pottery Defects 2: Defects from Raw Materials and Batching Errors


• Corporate Travel Policy


• Corporate Travel Management-Post 9/11


• Ceramic and Pottery Defects 3: Defects Generated During Forming Operations


• Has the Time Come For a Reconditioned Forklift Fleet?


• Restaurant Equipment Service and Preventative Maintenance Tips


• Whats After Starbucks?


• Where is Silicon Valleys A-Team?


• Do Women Rule by Committee?


• Why Automating your Business could be very Profitable


• Good First Impressions Count when You Mean Business